Need Boiler Installation in Dutchess County?
Boiler Installation in Dutchess & Ulster County, NY
Boiler installation means sizing, selecting, and fitting a new hot water or steam boiler to match the building’s demands. This involves choosing the right capacity, fuel type, and integration with existing piping, radiators, or baseboard heaters. Proper venting, circulator pump setup, and safety controls are included in the scope.
.png)
Why Choose Kent Road Plumbing & Heating for Boiler Installation
A new boiler is called for when the old unit becomes unreliable, inefficient, or develops leaks at the heat exchanger or cast sections. In many pre-1940 homes, original boilers may run for decades before corrosion, scale buildup, or failed controls render them unsafe or unable to hold pressure. When boilers short cycle, fail to ignite, or develop wet spots, replacement is often the lasting fix.
Kent Road Plumbing & Heating starts by measuring the building’s heat loss rather than guessing from the old boiler’s size. We look at radiator output, insulation, and window condition to recommend the correct capacity. Removal of the existing unit includes safe disconnection, draining, and proper disposal. The new boiler is assembled, piped in, and carefully integrated with pumps, expansion tanks, venting, and safety devices. All wiring needed for controls is coordinated with a licensed electrician.
Choosing a new boiler involves decisions about fuel type, efficiency, and venting method. The project may uncover undersized piping, non-code expansion arrangements, or air venting issues requiring upgrades while open. A residential boiler replacement is typically a two-day job, with commercial projects requiring more time. When it’s done, the customer is left with a balanced system, a manual for adjustments, and code-compliant installation ready for the next heating season.
All New Piping Connections Checked
Every supply, return, vent, and safety connection is tested for proper flow and leak-free seals. Old shutoffs and faulty air vents are upgraded as needed while the system is open. Each zone or loop is confirmed operational before final sign-off.
Upgrades for Safe and Modern Operation
New installations include code-required devices like expansion tanks, pressure relief, and low-water cutoffs if missing. We review venting and combustion air to ensure the entire system is safe and ready for the next heating season.
Sizing by Heat Loss and Radiation
We calculate the building’s heat loss and add up radiator output rather than simply matching the existing boiler. This ensures the new boiler matches current needs, reducing short cycling, increasing comfort, and bringing fuel costs in line with actual demand.
get in touch
Fill In your information below
About Our Boiler Installation Services
Boiler replacement is both a plumbing and a heating project, and Kent Road Plumbing & Heating has provided both since 2003. We are licensed and insured in New York, working homes and businesses daily with a mix of cast iron, steel, and modern high-efficiency units. With over 20 years of local experience, we know the realities of older buildings, tight basements, and mixed piping. Our schedule covers seven days a week, with jobs handled directly by employees—not subcontracted. We handle everything from the initial building assessment to the final air bleed, testing, and homeowner walkthrough. When you’re done, you know what was installed, how it works, and that the installation meets current code.
WHY DUTCHESS COUNTY PROPERTY OWNERS CHOOSE US
Licensed & Insured ⛨
25+ Years In Business ◷
300+ Satisfied Clients ✓
.png)
.png)
ABOUT US
Kent road plumbing & heating
Frequently Asked Questions
Yes. Kent Road Plumbing & Heating is fully licensed and insured in New York. Every technician who shows up at your door is trained, certified, and covered — so you can have complete peace of mind from the moment we arrive.
Kent Road Plumbing & Heating proudly serves Dutchess County, including Wappingers Falls, Fishkill, Beacon, Poughkeepsie, Hyde Park, Pleasant Valley, Rhinebeck, LaGrangeville, Hopewell Junction, Millbrook, Red Hook, and the surrounding area. Not sure if we cover your town? Give us a call and we'll let you know.
We handle everything from faucet repairs and toilet replacements to full boiler installations, furnace service, and sewer line work. If it involves your pipes, your heat, or your drains — we do it. Whether it's a small fix or a major job, we bring the same level of care to every call.
Yes. Pipes burst, boilers quit, and sewer lines back up — and none of it waits for business hours. Call (845) 518-1720 and we'll get someone to you as fast as possible.
Hydro jetting uses high-pressure water to blast grease, roots, and buildup out of your drain and sewer lines. It's more thorough than standard snaking and restores full flow to your pipes. We offer hydro jetting as part of our full drain and sewer service lineup.
OTHER SERVICES
Kent Road Plumbing & Heating offers a full range of plumbing, heating, and drain services throughout Dutchess County.
Boiler Replacement
A failed boiler means no heat and every hour in the cold increases the risk of frozen pipes. Boiler replacement is more than swapping units—it requires sizing, new connections, and meeting today’s safety standards. Kent Road Plumbing & Heating handles boilers for both older and newer homes, from cast iron radiators to modern baseboards. Most replacements add new shutoffs and venting not present in the original installation.
Boiler Maintenance
Regular boiler maintenance prevents mid-winter heating failures by catching problems like worn circulator pumps, clogged burners, or faulty controls. Annual cleaning and testing restores efficiency and extends boiler life while lowering the risk of breakdowns. Schedule maintenance before the heating season to address minor issues before they shut down your heat.
Water Heater Installation
A water heater installation means replacing an old tank or adding a new one, gas or electric, tank or tankless. The right unit is matched to the home’s usage and piping, not just swapped by size. Choices about venting, fuel, expansion tank, and relief valves matter. Old connections must meet current code. Shutoffs and drains should work as intended for safety. Properly installed, a new heater brings reliable hot water with fewer surprises and saves energy if sized and insulated correctly.
Select Services By The Area Of your Home
What Our Clients Say about us..
"Great Company , very reasonable and always shows up when called. I would highly recommend."
- Christine
.png)
"Ardi & associate came to our rescue last night when we had an emergency plumbing issue at our house at 8pm. I called them and they arrived promptly within 20 minutes to deal with our clogged drain. They were friendly, professional, & prompt. We will be using them again in the future without a doubt!! Thanks Kent Road Associates!!! :)"
- Eileen O'Connell
"These guys are great. I left them a message late in the night and they contacted me first thing in the morning. They were at my house within 25 minutes. They found a broken pipe under my sink and cleared the clog. They work fast and they don't overcharge!!!!! I will definitely use them in the future."
- Chillen Ev
"Always have good experience with them
Trustworthy, Hard working"
- Daniel Jagich
"Been dealing with Ardi for awhile and he does great work my heat went out last month and he fixed it with no problems!! Highly recommend, looking forward to working with him again"
- Matthew
GET STARTED
CALL/TEXT (845) 518-1720